Slide show
ImageGallery
DAHLGREN, Va. — Western Kentucky University student Abbie Schopper explains a prototype pitot static air velocity probe tested for use in a shipboard duct while briefing Navy personal during her 2016 summer internship, sponsored by the Naval Research Enterprise Intern Program (NREIP). “Throughout this summer, I have enjoyed my experience working here at Dahlgren, but I also feel like I have gained important experiences that are not found in the undergraduate curriculum,” said Schopper, who is pursuing a bachelor’s degree in mechanical engineering. “I would recommend NREIP to anyone with a STEM major, and would love to return.” Schopper’s project focused on air flow rate measurements for the shipboard Collective Protection System (CPS). Shipboard CPS air flow measurement procedures and instruments were selected decades ago based on instrumentation available at that time. With the development of variable speed drive control and automation of CPS, more accurate air flow measurements are needed. “Abbie determined an accurate method for measuring air flow in Collective Protection System zones installed with variable speed drive controls to decrease the air flow in non-threatening situations,” said Will Clark, NSWCDD mechanical engineer and CPS expert.
160728-N-DE005-006.JPG Photo By: U.S. Navy

Aug 23, 2016
Dahlgren, Va - DAHLGREN, Va. — Western Kentucky University student Abbie Schopper explains a prototype pitot static air velocity probe tested for use in a shipboard duct while briefing Navy personal during her 2016 summer internship, sponsored by the Naval Research Enterprise Intern Program (NREIP). “Throughout this summer, I have enjoyed my experience working here at Dahlgren, but I also feel like I have gained important experiences that are not found in the undergraduate curriculum,” said Schopper, who is pursuing a bachelor’s degree in mechanical engineering. “I would recommend NREIP to anyone with a STEM major, and would love to return.” Schopper’s project focused on air flow rate measurements for the shipboard Collective Protection System (CPS). Shipboard CPS air flow measurement procedures and instruments were selected decades ago based on instrumentation available at that time. With the development of variable speed drive control and automation of CPS, more accurate air flow measurements are needed. “Abbie determined an accurate method for measuring air flow in Collective Protection System zones installed with variable speed drive controls to decrease the air flow in non-threatening situations,” said Will Clark, NSWCDD mechanical engineer and CPS expert.


DOWNLOAD PHOTO (1.21 MB)


This photograph is considered public domain and has been cleared for release. If you would like to republish please give the photographer appropriate credit. Further, any commercial or non-commercial use of this photograph or any other DoD image must be made in compliance with guidance found at http://www.dimoc.mil/resources/limitations.html , which pertains to intellectual property restrictions (e.g., copyright and trademark, including the use of official emblems, insignia, names and slogans), warnings regarding use of images of identifiable personnel, appearance of endorsement, and related matters.



Back to Gallery