Southeast Regional Maintenance Center

Antonio Takes Helm of PEO Aircraft Carriers
June 1, 2016 — WASHINGTON – Rear Adm. Brian Antonio relieved Vice Adm. (sel) Tom Moore as program executive officer for the Aircraft Carrier (CV) program during a change of office ceremony June 1 at the Washington Navy Yard... MORE

160601-N-EM953-065 (June 1, 2016) WASHINGTON - Rear Adm. Brain Antonio assumed command of the Program Executive Office Aircraft Carriers in a ceremony today at the Washington Navy Yard.(U.S. Navy Photo by J. Raynel Koch/Released)

‘Dahlgren Engineer’ Returning as Senior Executive Commends Honor Awardees at NSWC Dahlgren Division Ceremony
May 31, 2016 — DAHLGREN,Va. – Eighty-two individuals and 19 teams were honored with 21 different Navyand Dahlgren... MORE

DAHLGREN, Va. - Naval Surface Warfare Center Dahlgren Division (NSWCDD) Commanding Officer Capt. Brian Durant presents Dohn Burnett with the John Adolphus Dahlgren Award for his years of exceptional technical and organizational leadership of NSWCDD at the command's Annual Honor Awards ceremony on May 18, 2016. "Mr. Burnett achieved numerous technical milestones throughout his exemplary career, including the integration and installation of the Aegis Baseline 9 combat system, basis cyber capability integration, establishment of the Fast Frigate Program, and the foundation for integration of railgun and laser systems into surface combatants," according to the citation.

Navy SSDS and RAM Block 2: Closing the Fire Control Loop
May 26, 2016 — WASHINGTON - In an effort to strengthen naval power at and from the sea, Rear Adm. Jon Hill, Program Executive Officer for Integrated Warfare Systems (IWS), advocated the importance of systems engineering and "the power that comes from a full-on integration of those systems [through] cooperative engagement modes" during a panel discussion at the Navy League's Sea Air Space exhibition, May 17... MORE

Navy Team Wins NAVSEA Commanders Award for EPIC Engine Invented to Transform Amphibious Missions
May 25, 2016 — WASHINGTON – It was a day of epic proportions for theNavy civilian scientists and engineers who are... MORE

WASHINGTON -Naval Surface Warfare Center (NSWC) Philadelphia Division engineer Justin Halls - standing via live video in lower left screen - joins NSWC Dahlgren Division engineers Greg Buchanan and Vince Vendetti at a Naval Sea Systems Command (NAVSEA) ceremony held in the Washington Navy Yard, April 26. NAVSEA Commander Vice Adm. William Hilarides and NAVSEA Executive Director Bill Deligne honored the engineers with the 2016 NAVSEA Commander's Innovation Award for their work on a new innovation called the Extreme Power Internal Combustion (EPIC) engine. "Our team has the initiative, drive, creativity, ingenuity, and experience to bring this game-changing, mission transformational technology to reality," said Buchanan. "Combined with the rapid prototyping, additive manufacturing, and innovation design capabilities of the collaborating warfare centers, we will bring this engine's decisive advantage to the warfighter." Standing left to right are Hilarides, Halls, Buchanan, Vendetti, and Deligne.

Navy Officials: 3D Printing To Impact Future Fleet with ‘On Demand’ Manufacturing Capability
May 23, 2016 — DAHLGREN,Va. – Is it possible to produce parts and equipment from scratch for Sailors –aboard ships... MORE

NATIONAL HARBOR, Md. (May 17, 2016) - Navy engineer Steve Price briefs 2016 Sea-Air-Space Expo attendees on the small additively manufactured modular payload multi-rotor. This low cost, 3D printed, unmanned aerial vehicle can accept a wide variety of custom payloads. The UAV was one of the exhibits featured at the Navy Additive Manufacturing Showcase in Dahlgren, Va., last month that were selected for display at the Sea-Air-Space Expo. "The volume of creative and innovative ideas made feasible with 3D Printing is astounding," said Lynn Shoppell, a Naval Surface Warfare Center Dahlgren Division physicist after the Dahlgren showcase. "The exhibitors demonstrated that their concepts for increased technical capabilities, rapid prototyping, improved logistics operations, and cost reduction initiatives are achievable with 3D Printing. Participants also experimented with additive manufacturing technology research and development."

ATFP logo

To maintain proper Operational Security, please refrain from the following while visiting our website, thank you:

Do not post specific deployment dates.
Do not post sailors and the ship’s information.
Do not post information about the sailors and ship movements.
Do not use count-down clocks.
Do not post any of the above information in secret or closed social media groups.
Do not post photos that show your military loved ones name or location

For more information please visit: https://www.nsfamilyline.org/opsec