Naval Sea Systems Command > Media > News

MARMC Team Supports USS Iwo Jima Amphibious Ready Group in the Caribbean
February 6, 2026 — A Sailor and civilian team from the Mid-Atlantic Regional Maintenance Center (MARMC) completed a two-week assignment in the Caribbean in December 2025 to deliver repair services in support of the USS Iwo Jima (LHD 7) Amphibious Ready Group, reinforcing the Navy’s ability to project maintenance capability forward in dynamic operational environments. The assignment occurred while U.S. military forces were deployed to the Caribbean in support of Operation Southern Spear... MORE

USS Iwo Jima (LHD 7) sits pier side in St. Croix, U.S. Virgin Islands, Dec. 11, 2025.

Naval Engineers Enhance Submarine Fleet's Tactical Edge with In-House Modernization
February 6, 2026 — A dedicated team of engineers and technicians from Mid-Atlantic Regional Maintenance Center’s (MARMC) Submarine Towed Systems Branch (Code 274) is improving the operational capabilities of the Navy’s fleet by building and installing a new critical control system... MORE

Engineers assigned to Mid-Atlantic Regional Maintenance Center's (MARMC) Submarine Towed Systems Branch (Code 274) pose for a photo with a modernized computer system.

MARMC Chief Petty Officer Receives Bob Feller Act of Valor Award.
September 8, 2025 — Chief Gas Turbine System Technician (Mechanical) Ollie Dunlap, a native of Waianae, Hawaii, assigned to Mid-Atlantic Regional Maintenance Center (MARMC), was recently named a 2025 recipient of the Bob Feller Act of Valor Award, which will be conferred upon him during a ceremony in Washington D.C. this November... MORE

Norfolk, Va. - Gas Turbine System Technician (Mechanical) Chief Petty Officer Ollie Dunlap poses for a photo at Mid-Atlantic Regional Maintenance Center. He is the recipient of the Bob Feller Act of Valor Award for FY25.

Mid-Atlantic Regional Maintenance Center Holds Change of Command
September 3, 2025 — Capt. Dan Hemminger relieved Capt. Jay Young as commanding officer, Mid-Atlantic Regional Maintenance Center (MARMC) during a change of command ceremony onboard Naval Station Norfolk, April 25... MORE

Dynamic Supports Cost-Saving Maintenance Evolution for ACU-2 Craft
September 3, 2025 — The Mid-Atlantic Regional Maintenance Center (MARMC) auxiliary floating dry dock Dynamic (AFDL 6) successfully completed a docking and undocking evolution for Landing Craft Utility (LCU) 1654, assigned to Assault Craft Unit (ACU) 2 at Joint Expeditionary Base Little Creek-Fort Story... MORE

Navy Divers Repair USS Iwo Jima
September 3, 2025 — Navy divers, assigned to units of Explosive Ordnance Disposal Group 2 and the Mid-Atlantic Regional Maintenance Center (MARMC), conducted vital underwater ship husbandry work on USS George H.W. Bush and USS Iwo Jima, July 7-11, ensuring the fleet remains safe, ready, and mission-capable... MORE

Navy Chief Season Underway at MARMC
September 3, 2025 — The Chief’s Mess is unequivocally one of the most crucial links connecting the junior ranking to the top brass of any command. To be selected to ‘The Mess,’ a First-Class Petty Officer has to excel amongst their peers. But it doesn’t stop there. After being selected, the ‘Chief Selects’ must continue to prove their worthiness to ‘Be the Chief,’ in a time-tested, tried and true process—the Initiation... MORE

MARMC Tests Aluminum Repair Technology Aboard USS Carter Hall
September 3, 2025 — The Mid-Atlantic Regional Maintenance Center (MARMC) is conducting the first operational deployment of an aluminum repair technology aboard dock landing ship USS Carter Hall (LSD 50)... MORE

MARMC Revisits Motor Rewind Capability
September 3, 2025 — “Motor rewind is the process of restoring an electric motor to working condition by removing and replacing its internal wire windings,” explained Leading Chief Petty Officer Joshua Stribling. “This extends the life of the motor, restores efficiency, and avoids the cost of full replacement.”... MORE

Carderock Designs 3D-Printed Overboard Discharge Scupper Technology
July 17, 2023 — Naval Surface Warfare Center, Carderock Division employees have collaborated with Mid-Atlantic Regional Maintenance Center (MARMC) in Norfolk to design and 3D print overboard discharge scupper technology using polymers to eliminate running rust stains from U.S. Navy ships. The project is funded by Naval Sea Systems Command’s Painting Center of Excellence (05P)... MORE

Engineer Bill Manning uses a sealant to prevent water from getting in between the Very High Bond tape on the scupper and the surface of USS Kidd (DDG 100) in Everett, Wash., on June 21, before attaching the 3D-printed overboard discharge scupper. (U.S. Navy photo provided by Dr. Maureen Foley)

Headquarters

Media Queries